Table of Contents
Advertisement
Available languages
Available languages
EN
Comfort temperature is the first temperature value to modify, the temperature value can be adjusted by pressing +/- keys. Press
Ok/Mode key to confirm the value of the temperature and to navigate among the three temperature levels (Comfort,
economic, frost protection). Modify the value of each temperatures using the +/- keys.
It is possible to confirm the changes and to exit of temperature adjustment by pressing Config/Prog key at any time.
Programming and time settings
By default, economic temperature level is applied in all time intervals.
To modify the program, hold the Config/Prog key for 3 seconds. The next figure will be displayed, where the first time interval
will be blinking.
Select the temperature level for the first time interval of first day using OK/Mode key.
Use +/- keys to navigate for the different time intervals. By pressing + key when the 24h of the Day 1 is selected, the Day 2
programming is activated. Repeat the procedure to establish the programming of all days in the week.
After the programming of all days in the week, by pressing + key when the 24h of the Day 2 is selected, you pass to the Time
Settings. It is possible to access directly to Time Settings by pressing Config/Prog key at any point in the programming mode.
The next figure is displayed, where the day of the week is blinking.
By pressing +/- keys, the day of the week is selected (1...7), the value is confirmed by pressing OK/Mode key and the hour in
the time setting is selected. Repeat the procedure realized to establish the day of the week to configure the hour and minutes. It
is possible to exit Time Settings by pressing Config/Prog key at any time.
It the device is associated with a G-Control Hub, the adjustment of time is removed and the time in the G-Control Hub is
configured in the unit automatically.
3.3.- GREEN BACKLIGHT
Pressing any key the display will illuminate with a soft green colour. After certain time if no keys are pushed the display backlight
will turn off.
3.4.- KEYBOARD LOCK
In every operation mode it is possible to lock the keyboard by holding "+" and "-" keys
simultaneously for 3 seconds. When the keyboard is locked, the message Lock will be displayed.
When the keyboard is locked, if any button is pressed, the display will show "Lock" and the unit will
not respond.
To unlock the keyboard, press the "+" and "-" keys simultaneously for 3 seconds.
15
Advertisement
Table of Contents
