Gabarron Diligens DIL4GC Installation Instructions And User Manual page 11

Wifi thermal radiator
Hide thumbs Also See for Diligens DIL4GC:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION INSTRUCTIONS AND USER GUIDE
1. WARNING
Please read these instructions before installing or using this appliance for the first time.
The warranty of the heater will not cover any damage caused by non-observance of any of these instructions.
The instructions should be retained for future reference. This guide must be kept and given to any new owner.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance.
Cleaning and user maintenance must not be made by children without supervision.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed
or installed in its intended normal operating position and they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8
years shall not plug in, regulate and clean the appliance or perform user maintenance.
Children of less than 3 years should be kept away unless continuously supervised.
Please check that the voltage in the rating label fits the power supply.
The use of these heaters is forbidden in any area where there is a presence of gases, explosives or inflammable objects.
Do not use this heater to dry clothes. Do not cover this heater or put objects in contact with it.
Neither the connecting cable nor any other object must come into contact with the hot unit.
Do not cover this heater at any time.
The air outlet at the top of the thermal radiator and the air inlet at the bottom are provided to ensure the most
efficient operation of the appliance. They also protect the heater from overheating; therefore, it is essential that at no
time are they covered.
This heater should be switched off at the isolating switch before any repair work is carried out.
The installation must be carried out in accordance with the current electrical regulations.
Should the heater be moved and reinstalled it is essential that the work is carried out by a fully qualified technician.
The heater should not be installed just below an electrical socket.
The appliance must be installed in such a way that it is impossible for anyone using a bath or shower, to touch the
controls.
The heater is fitted with a flexible cable size 3 x 1.00 mm² for electrical connection. It may be used to connect the
heater to the fixed wiring of the premised through a suitable connection box positioned adjacent to the heater.
The supply circuit to the heater must incorporate a double pole isolating switch having a contact separation of at least
3 mm.
If the flexible power cable for this unit is damaged, it may only be replaced by a repair workshop recognised by the
manufacturer, as special tools are necessary.
This appliance must be earthed.
All models are supplied with an electrical interrupt cut-out. This will switch off the heater if, for any reason, it
overheats. Should the cut-out operate, turn the heater off and remove the cause for the overheating. The cut-out will
be reset automatically.
The presence of air particles of smoke, dust and other pollutants could, in time, discolour the walls and surfaces around
the heater.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention must be given
when children and vulnerable people are present.
WARNING: In order to avoid overheating do not cover the heater.
11
EN

Advertisement

Table of Contents
loading

Table of Contents