Gabarron Elnur ECOMBI HHR Series Installation Instructions Manual

Gabarron Elnur ECOMBI HHR Series Installation Instructions Manual

High heat retention, ecodesign lot20 compliant

Advertisement

ECOMBI HHR
High Heat Retention
ECOHHR20 | ECOHHR30 | ECOHHR40
Please read these instructions carefully before
Please read these instructions carefully before
installing or using this appliance for the first time.
installing or using this appliance for the first time.

Advertisement

Table of Contents
loading

Summary of Contents for Gabarron Elnur ECOMBI HHR Series

  • Page 1 Installation Instructions ECOMBI HHR High Heat Retention ECOHHR20 | ECOHHR30 | ECOHHR40 Please read these instructions carefully before Please read these instructions carefully before installing or using this appliance for the first time. installing or using this appliance for the first time.
  • Page 2 1. IMPORTANT INFORMATION ECOHHR20 ECOHHR30 ECOHHR40 Balancing element output 1100 • Please read all the instructions carefully before Storage heater element rating 1742 2613 3484 installing or using the heater for the first time Charge period and retain for future use. Charging (7h) 12.2 18.3...
  • Page 3 INSTALLATION INSTRUCTIONS The symbols used in the text are explained below: WARNING This indication shows the possibility of causing death from electric shock. WARNING This indication shows the possibility of causing death or serious injury. CAUTION This indication shows the possibility of causing injury or damage to properties only.
  • Page 4 INSTALLATION INSTRUCTIONS In order to achieve a correct installation of this device, follow these steps: Choose the right location to install the Ecombi HHR. The minimum clearances must be respected from the appliance to any combustible material such as furniture or curtains. To reduce the risk of fire, do not store or use petals or other flammable liquids and vapours in the vicinity of the heater.
  • Page 5 INSTALLATION INSTRUCTIONS Fix the side fixing plates to the metal casing by using the appropriate screws. The supply cables must be fitted but not wired to the storage heater before placing the heater to the wall. Remove the white screws located in the top of ECOHHR, and place the ECOHHR in the selected installation area.
  • Page 6 INSTALLATION INSTRUCTIONS Unscrew the inner panel and remove it. WARNING: Steel edges can cut. CAUTION : In the interior part of this inner panel there is a very delicate MICROTHERM insulation panel. It has to be handled with extreme care. AVOID TOUCHING OR BENDING IT.
  • Page 7 INSTALLATION INSTRUCTIONS Place the third row of storage bricks with the flat side facing out. Refit the inner front panel. If the bricks have been fitted correctly you will have no difficulty in refitting the panel. Make sure the bottom edge of the inner panel is inside the front lip of the heater. Please see below: Replace the front panel.
  • Page 8 TECHNICAL FEATURES Model ECOHHR20 ECOHHR30 ECOHHR40 Connection 240V 240V 240V Balancing Element Output 550W 820W 1100W Storage Heater Output 1742W 2613W 3484W Charge Period Charging 12.2 kWh 18.3 kWh 24.4 kWh Insulation Class I Class I Class I Width 72cm 95cm 117cm Height...
  • Page 9 INSTALLATION INSTRUCTIONS Connection and Disconnection Each ECOHHR storage heater has its own power switch and is located on the right side panel. The power switch is used to turn the heater ON and OFF. If this switch is turned OFF then the storage heater will not take a charge when the off-peak supply is on and will not give out any heat.
  • Page 10 INSTALLATION INSTRUCTIONS General Settings The General settings MUST be configured after installation by the installer to ensure correct operation. It is important to configure the off peak times correctly. The HHR allows you to configure two separate off peak charge periods; Period 1 via P01 & P02 and Period 2 via P03 &...
  • Page 11 INSTALLATION INSTRUCTIONS Factory Reset Factory reset allows you to reset the heater back to its factory default settings. To Reset, turn ON the heater via the switch at the right side of the heater while holding down the clock buttons at the same time.
  • Page 12 RELOCATION WARNING: Relocation to another location must be carried out by an experienced technician. If during reinstallation the thermal insulation shows any sign of damage, it must be removed and replaced by an identical part. MANUALLY RESET TEMPERATURE LIMITER MANUALLY RESET TEMPERATURE LIMITER This heater employs a manual reset temperature limiter (see LR in the connection diagram).
  • Page 13 INSTALLATION INSTRUCTIONS Connection Diagram – HHR20 ECOHHR20 MAIN COMPONENTS LIST Storage Heating Element Ref. 10190410 8. Switch Ref. 46100530 2. Fan ECOHHR20 Ref. 15192636 9. Main PCB Ref. 15192125 3. 275W Balancing Element ECOHHR20 Ref. 15192000 10. Keyboard PCB Ref. 15190060 4.
  • Page 14 INSTALLATION INSTRUCTIONS Connection Diagram – HHR30 ECOHHR30 MAIN COMPONENTS LIST 8. Switch Storage Heating Element Ref. 10190410 Ref. 46100530 2. Fan ECOHHR30 Ref. 15192638 9. Main PCB Ref. 15192125 3. 410W Balancing Element ECOHHR30 Ref. 15192002 10. Keyboard PCB Ref. 15190060 4.
  • Page 15 INSTALLATION INSTRUCTIONS Connection Diagram – HHR40 ECOHHR40 MAIN COMPONENTS LIST 8. Switch Storage Heating Element Ref. 10190410 Ref. 46100530 2. Fan ECOHHR40 9. Main PCB Ref. 15192638 Ref. 15192125 3. 550W Balancing Element ECOHHR40 10. Keyboard PCB Ref. 15192004 Ref. 15190060 4.
  • Page 16 PRODUCT FICHE MODEL(S): GABARRON ECOHHR20, ECOHHR30, ECOHHR40 Value Item Symbol ECOHHR20 ECOHHR30 ECOHHR40 Unit Heat Output Nominal heat output Minimum heat output N.A. N.A. N.A. Maximum continuous heat output max, c Auxiliary electricity consumption At nominal heat output 0.000 0.000 0.000...
  • Page 17 Supplier: The symbol on the product or in its packaging indicates that this ELNUR UK Ltd. product may not be treated as household waste. Instead it shall Unit 1, Brown Street North be handed over to the applicable collection point for the recycling Leigh, Lancashire, WN7 1BU.

This manual is also suitable for:

Elnur ecohhr20Elnur ecohhr30Elnur ecohhr40

Table of Contents