Gabarron ADL 5030 Installation Instructions And User Manual
Gabarron dynamic storage heaters
Hide thumbs
Also See for ADL 5030:
- Installation instructions and user manual (12 pages) ,
- Installation instructions and user manual (5 pages)
Related Manuals for Gabarron ADL 5030
Summary of Contents for Gabarron ADL 5030
- Page 1 INSTALLATION INSTRUCTIONS AND USER GUIDE IECEE IECEE SCHEME DYNAMIC STORAGE HEATERS ADL 5030 ADL 4024 ADL 3018 ADL 2012 Please read these instructions before installing or using this appliance for the first time...
- Page 2 The heaters consume electricity only during the off-peak tariff, but due to the highly efficient storage medium, give you a truly economical 24 hours of comfort temperatures. Model ADL 2012 ADL 3018 ADL 4024 ADL 5030 Input 2000W 3000W 4000W 5000W Voltage 220 –...
-
Page 3: Installation Instructions
Dynamic Storage Heaters The input control operates a highly sensitive thermostat which regulates the amount of heat stored. The discharge takes place when the built-in blower operates. The blower drives fresh air through the core and is heated. A bimetallic device mixes the hot air with fresh air to provide homogeneous temperature. It is important that the correct rating of heater is installed to provide the selected level of heat. - Page 4 Dynamic Storage Heaters 5.- Attach the LH & RH spacers to the storage heater using the screws supplied, in the same way as the screws are fixed in the upper rear section of the heater side. Check the heater is separated 25mm from the wall at the top and bottom of the heater (Fig.
- Page 5 Dynamic Storage Heaters 8.- Check that the heating element rests completely on the bricks without restricting a new row (Fig. 4). fig. 4 9.- Arrange two new rows of bricks, ensuring the flat side of each bricks is facing towards the bottom of the heater, and insert a new heating element.
-
Page 6: Using The Heater
Dynamic Storage Heaters INSTALLATION OF THE WIRELESS AMBIENT THERMOSTAT (OPTIONAL). - Fix the module to the wall vertically. - Connect the module following the attached diagram and the color code. - Do not leave any remaining wire inside the heater. - The wireless ambient thermostat has its own instructions. - Page 7 Dynamic Storage Heaters WARNING: In order to avoid overheating do not cover the heater. The symbol on the product or in its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
- Page 8 ELNUR UK Ltd. Unit 1, Brown Street North Leigh, Lancashire WN7 1BU www.elnur.co.uk Customer Service Department: Telephone +44(0)1942 670119 technical@elnur.co.uk Manufactured by: ELNUR, S.A. Madrid, Spain www.elnur-global.com export@elnur-global.com Management System International Certifications: As a part of the policy of continuous product improvement Elnur reserves the right to alter specifications without notice. INSTALLATION INSTRUCTIONS AND USER GUIDE WEB VERSION...