Installation - Strong SRT HB3003 User Manual

5.4 Installation

Press MENU to display the main menu. Press pq to select Search in the main menu. Press OK it access
and press pq to select the option you wish to adjust in the Search menu. Press OK to enter and to
adjust.
Below items depend if they are available of select input source. Use SOURCE to select other source.
5.4.1 Auto Tuning
Press pq to select Auto Tuning, select the Region Tune Type and proceed with OK. If you use DTV as
input source, you can switch between DVB-T Terrestrial and DVB-C Cable. If you use Satellite as input
source, you can select the satellite you dish are pointing to and how want to search for.
5.4.2 Dish Setup (Satellite)
The Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port(s) and LNB
type. Also you can select motor support and GoTo-X function. Afterwards you may start the Auto Tuning
or Manual Tuning by selecting with EPG button the wanted transponder.
5.4.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press OK to enter
the sub-menu.
Press t u to select a Channel No., and then press OK to start the search. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press MENU.
5.4.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Installation menu, select ATV Manual Tuning and press
OK to access. Highlight and press pq to select Current CH 1 (maybe other number), Sound System and
Channel No.. Then select Search and press OK to start the search. Press u for the unit to search towards
higher frequency. Press t for the unit to search towards lower frequency. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press MENU.
Current CH
Colour System
Sound System
Fine-Tune
Search
5.4.5 Channel extra settings
Programme Edit
NOTE:
Set the channel number
Select the colour system (Available: AUTO, PAL, SECAM)
Select the Sound system
Adjust the frequency of the channel
Start the channel search
Edit the programmes. You can press the COLOUR BUTTONS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing FAV.
Some regions are using automatically channel sorting and numbering
(LCN). Which make renumbering of channels by sorting and deleting of
channel list not possible. This will auto selected by country selection.
11