Table of Contents
Advertisement
Stand assembly instruction
1. Carefully place the TV with its front side facing down on a cushioned flat surface in order to protect the TV and the TV screen from damage.
2. Take out the 2x stand feet and assemble them to the TV.
3. Fasten the feet to the bottom of the TV using the 4x ST4*20mm (32'') screws.
This user manual provides complete instructions for installing and using this TV. The symbols serve as follows.
WARNING
Indicates warning information.
NOTE
Indicates any other additional important or helpful information.
MENU
Represents a button on the remote control or the TV.
(Bold characters)
Move to
Represents a menu item within a window.
(Italic characters)
2.0 INSTALLATION
2.1 Default PIN code: 1234
2.2 Front panel/underside
NOTE:
The graphics are for representation only.
1. Power indicator /remote sensor
2. Speakers
3. Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
4. Power switch ON/OFF
2.3 Side panel
NOTE:
The graphics are for representation only.
1. USB 2.0
Connect a USB device for playback of multimedia files
2. COMMON INTERFACE
Connect a Conditional Access Module (CAM).
3. EARPHONE
Speakers will be muted when earphone is plugged in and headphone selected.
4. AV IN
3.5 mm female jack entry for composite video and left/right audio connection.
5. HDMI 1
Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
6. HDMI 2 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier
that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio
connections and for a full Dolby audio support.
7. SATELLITE IN Connect a satellite dish to the TV for searching programmes.
8. ANTENNA IN Connect a terrestrial antenna or cable connection from your provider to the TV for searching programmes.
9. S/PDIF (OPTICAL)
Use an optical cable to connect your TV to a compatible digital amplifier or Home theatre set.
2.4 Remote control
1. q
Press to turn the TV on or standby.
2. !
Press to mute or restore the volume.
3. 0 ~ 9
Choose channel directly.
4. ECO
Select desired power saving mode.
5. EPG
Press to display the current EPG information in DTV mode.
6. VOL +/-
Adjust the volume up or down.
7. SMART KEY
Press to open extra options.
8. CH +/-
Change programmes up or down. Big steps in Channel list.
9. INFO
Display information about the current source.
4
Fig. 1b
Fig. 1c
Fig. 2
Fig. 3d
Fig. 4
Advertisement
Table of Contents
