Dvb-T/T2 Installation; Dvb-C Installation - Strong SRT HB3003 User Manual

Channel Search
Press pq t u to highlight the options of choice and press OK to start the channel search.
Scan Mode
Channel Type
Service Type
It is recommended to use the default settings.
NOTE:

3.2 DVB-T/T2 installation

Terrestrial Setting
Here you only need to press OK to start searching.
All settings are automatically set by country selection you made in first step.
NOTE:

3.3 DVB-C installation

Cable Setting
Press pq t u to highlight your settings.
Scan type
NOTE:
Network ID
Frequency
Symbol
NOTE:
Press OK to continue and to start search process.
8
Choose between Default (recommended), Blind Scan and Network and Fast
Scan
Select Free to search Free-To-Air channels only,
Select Scramble to search Encrypted channels only, All Channels to search FTA
and Encrypted channels.
Select DTV to search Digital TV channels only, RADIO to search radio channels
only or All for a complete search.
Fast Scan option allows you to load pre-installed channel list from some
providers. This selection list appears when you have chosen Fast Scan and
confirm with OK button.
If you have an active antenna, please check the user manual of the antenna
for external power supply. The TV can NOT supply power used for an active
antenna.
You can select Network Scan or Full. (Default Network Scan for quick search
advised).
Full scan will have a duration of approximately 20 minutes, depending on
your cable network.
Please enter (with 0 ~ 9) the used Network ID from your provider.
Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
Please check the settings for your cable system used by your provider!