Sound Menu - Strong SRT HB3003 User Manual

Contrast
Brightness
Colour
Tint
Sharpness
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press pq to select Colour Temperature, then press OK to enter a sub-menu. Press pq to select the
relevant picture effect (DEFAULT: Cold Normal Warm).
Cold
Normal
Warm
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press pq to
select Noise Reduction, then press OK to enter a sub-menu.
Off
Low
Middle
High
Default

5.3 Sound menu

Sound Mode
Enjoy Music
Auto Volume
S/PDIF Type
AD Switch
* Availability depending on broadcaster
10
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Adjust the optical fiber output of the entire picture, it will effect the dark
region of the picture.
Adjust the saturation of the colour based on your own preference.
No function
Adjust the peaking in the detail of the picture.
lncrease the blue tone for the white.
Increase the neutral colours for the white.
lncrease the red colour for the white.
Select to turn off video noise detection.
Detect and reduce low video noise.
Detect and reduce moderate video noise.
Detect and reduce enhanced video noise.
Set as Default.
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and Personal.
Turns off the screen or switch to music source when it will be found on HDMI
input.
Adjust the volume corresponding to the input audio level. Options are On
and Off.
If you have connected S/PDIF output to digital home audio system. You can
select "Auto" to output Dolby audio* automatically. If channel have this audio
channel. Selection PCM is only stereo audio and Off is to switch off this output.
Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)