Related Manuals for Strong SRT32HA3303U
Summary of Contents for Strong SRT32HA3303U
- Page 1 LED TV with DVB-T2/C/S2 SRT 24HA3303U SRT 32HA3303U SRT 40FA3303U User manual Посібник користувача Руководство пользователя Version 6.0...
- Page 4 Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna, Austria Email: support_at@strong.tv 02 Jan 2019 17:17...
- Page 5 Hereby, STRONG declares that the radio equipment type LED TV is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
-
Page 6: Table Of Contents
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference. TABLE OF CONTENT 1.0 INSTRUCTION 5.0 TV 1.1 Safety Instructions 5.1 Channel 1.2 Storage 5.2 Picture 1.3 Accessories 5.3 Sound 1.4 Equipment set-up 5.4 Option 5.5 Lock 2.0 INSTALLATION... -
Page 7: Instruction
1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. „ „ Only use attachments/accessories specified or provided by the manufacturer (such as the „ „ exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety „... -
Page 8: Storage
WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. -
Page 9: Installation 2.1 Default Password: 0000
2.0 INSTALLATION 2.1 Default password: 0000 2.2 Front panel/underside Fig. 2 NOTE: The graphics are for representation only. 1. Speakers 2. Power indicator /remote sensor 3. Joystick for select modes function of TV 4. Power switch 2.3 Rear panel NOTE: The graphics are for representation only. Fig. 3 1. -
Page 10: Remote Control
2.5 Remote control Fig. 5 1. ! Press to mute or restore the volume. 2. q Press to turn the TV on or standby. Change aspect ratio. 4. SOUND Change sound mode. 5. SLEEP Select the sleep time, such as 10 min, 20 min, etc. 6. -
Page 11: Installing The Batteries
Do not place the remote control under direct sunlight which will cause deformation of the unit „ „ by heat. When the remote sensor is under direct sunlight or strong lighting, the remote control will not „ „ work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor. -
Page 12: Fti Without Dtv Installation
If you have connected the TV set to your home router using an Ethernet cable, then the Network setting screen appears confirming the connection. Press OK to continue the installation. If you did not connect the TV set with an Ethernet cable, then the Choose Wi-Fi screen will appear. Select the network from the list or select Skip and press OK. - Page 13 LNB Type Highlight this item and press OK to select between available types, according to your LNB for selected satellite. 22kHz Tone Set Auto for most of cases, especially Universal LNB. Toneburst Keep None if there are no Tone Burst switch in your antenna system. Otherwise, set accordingly to the physical antenna configuration.
-
Page 14: Aerial Or Cable Installation
3.6 Aerial or Cable installation For Aerial and Cable antenna type following settings are available: Channel Order Selection of LCN will order channels according to numbering provided by the TV network operator. Select Service ID if you wish channels to be ordered in Frequency descending order. -
Page 15: Channel Scan
3.7 Channel scan The TV set will scan for TV and Radio (if available) channels. After scan completed it will save all found channels and tune to the first channel in the list. 4.0 HOW TO USE THE ANDROID PLATFORM After turning on your TV, Android Home Menu screen opens. -
Page 16: File
4.1.2 ATV After selecting this item you can start watching analogue TV channels. You can do various settings via the ATV settings menu. To access the settings menu, press button. Settings are similar to the DTV settings. 4.1.3 AV, HDMI Selection of these items will switch the TV set input accordingly. -
Page 17: Some Features Of Rcu Usage
4.5 Some features of RCU usage Please take notes for useful features of some buttons on your RCU. From any application you could use such buttons: Use to return to Home screen of Android from any application of TV set. to open menu (if available) of any application, including DTV. -
Page 18: Channel
Selection of audio language Some channels support a choice of audio formats and/or languages. To select another audio stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq to select a stream and confirm with OK. The audio channel as stereo, left and right can be selected with the t u buttons. - Page 19 DTV Manual Tuning This option allows you to scan just one frequency for digital aerial broadcasting channels by selecting frequency channel number. Below in the screen you will find signal strength and quality bars for optimizing the best signals of your terrestrial antenna.
- Page 20 Select Search and press OK to start scanning After scanning all channels on selected frequency will be updated according to scanning results. ATV Manual Tuning This option allows you to scan manually for analogue cable channels. NOTE: Selection of this option will switch application to ATV. To return to DTV application please select DTV in TV input sources.
-
Page 21: Picture
Red, Green and Blue colours manually. Zoom Mode Available options are: Auto, 16:9, 4:3, Zoom1 and Zoom2. Image Noise Reduction Available options are: Auto, Weak, Middle, Strong and Off. MPEG Noise Reduction Available options are: Weak, Middle, Strong and Off. 5.3 Sound This sub-menu provides possibility for setting sound parameters for better listening of broadcasted programme. -
Page 22: Lock
5.4 Option This sub-menu provides possibility for system setting. Available parameters: Audio Language Select your preferred main audio track language. 2nd Audio Language Select your preferred audio track language if first is not available. Subtitle Select Off if you do not want subtitles to be shown or On to switch them on. Subtitle Language Select your preferred main subtitles language. -
Page 23: Electronic Programme Guide (Epg)
5.6 Electronic Programme Guide (EPG) The Electronic Programme Guide is a very useful function that allows you to view future event schedules and to mark events/movies for reminding or recording in time. The Electronic Programme Guide (EPG) shows programme schedules and information for current programmes and coming programmes up to the next 7 days. -
Page 24: Timeshift
Formatting will permanently delete ALL data stored on the connected device. Please make a backup copy of all data you wish to keep before entering the Format Start menu. STRONG cannot be held responsible for loss of data from USB devices used with this receiver. -
Page 25: File
NOTE: Please connect an USB storage device with sufficient free space before you start a recording. 6.0 FILE This chapter provides more detailed description how to use file management and for multimedia functions. 6.1 File Manager This application allows you to get know the content of selected storage device. It gives you access to the internal storage and external storage devices connected via USB. -
Page 26: Music
Use t u to scroll through available applications to select and press OK to start it. NOTE: STRONG cannot guarantee and cannot be on responsible of the (mal-) function and working of third party apps. Please consider, that some applications functioning good only on devices with built-in touchscreen,... -
Page 27: Install/Uninstall Applications Manually
(Wi-Fi). Select and enter your network here, store passwords and/or other access „ „ parameters. 8.2 Setting In this sub-menu you can make General settings for your system like: change the name of your TV STRONG TV; „ „ select wallpaper theme; „ „... -
Page 28: Picture And Audio
define screensaver activity. Available options are: 5 minutes, 10 minutes, 15 minutes, 20 minutes „ „ and Off; select language for your OSD and menu; „ „ select input method (for your on-screen keyboard); „ „ grant or deny installation of applications from unknown sources; „... - Page 29 Device: Apps; „ „ Preferences: Date & Time; „ „ Personal: list of registered in system accounts (or Add account if empty). „ „ Apps Divided into line for various types of installed applications: Downloaded apps: for applications, which were installed manually by user; „...
-
Page 30: Troubleshooting
TV still does not work well, contact your dealer or service centre in your area or write an email to our support line via our website www.strong.tv. If the DTV part shows problems with reception, first check if all cables and connectors still are in good condition. -
Page 31: Specifications
Forgotten your password Default password is 0000 Contact your local Service Hotline or send an email to our support via www.strong.tv The external USB HDD does not The power consumption is too Connect an extra power supply start. high. - Page 32 40“: 6.2 kg Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. STRONG,...