Delay Timer; Power Interruption Protection - Kenwood BM25 Instructions Manual

11 Press the MENU button
program is selected. The breadmaker will default
to 1Kg & medium crust colour. Note: If using the
"RAPID BAKE" , just press the button and the
program will start automatically.
12 Select the loaf size by pressing the LOAF SIZE
button until the indicator moves to the
required loaf size.
13 Select the crust colour by pressing the CRUST
button until the indicator moves to the
required crust colour (light, medium or dark).
14 Press the START button
the program press the START/STOP button for 2
– 3 seconds.
15 At the end of the baking cycle unplug the
breadmaker
16 Remove the bread pan by holding the handle
and turning the pan to the back of the baking
chamber. Always use oven gloves as the
pan handle will be hot.
17 Then turn out onto a wire rack to cool.
18 Leave the bread to cool for at least 30 minutes
before slicing, to allow the steam to escape. The
bread will be difficult to slice if hot.
19 Clean the bread pan and kneader immediately
after use (see care and cleaning).

delay timer

The Delay timer allows you to delay the bread
making process up to 15 hours. The delayed start
cannot be used with the "RAPID BAKE" program
and is not recommended for use with either the
dough, jam or gluten free settings.
IMPORTANT: When using this delayed start
function you must not use perishable ingredients –
things that 'go off' easily at room temperature or
above, such as milk, egg, cheese and yoghurt etc.
To use the DELAY TIMER simply place the
ingredients in the bread pan and lock the pan into
the bread maker. Then:
l
Press the MENU pad
program – the program cycle time is displayed.
l
Select the crust colour and size required.
l
Then set the delay timer.
l
Press the (+) TIMER pad and keep pressing until
the total time required is displayed. If you go past
the required time press the (-) TIMER pad to go
back. The timer pad when pressed, moves in 10
minute increments. You do not need to work out
the difference between the program time selected
and the total hours required as the bread maker
will automatically include the setting cycle time.
until the required
. To stop or cancel
to choose the required
Example: Finished loaf required at 7am. If the
breadmaker is set up with the required recipe
ingredients at 10pm the evening before, total time
to be set on the delayed timer is 9 hours.
l
Press the MENU pad to
choose your program
e.g. 1 and use the (+)
timer pad to scroll the
time in 10 minute
increments to display
'9:05'. If you go past
'9:05', simply press the
(-) timer pad until you
return to '9:05'.
l
Press the start pad and
the display colon (:) will
flash. The timer will start
to count down.
l
If you make a mistake or
wish to change the time
set, press the
START/STOP pad until it
beeps. You can then
reset the time.

power interruption protection

Your Bread Maker has an 8 minute power
interruption protection in case the unit is accidentally
unplugged during operation. The unit will continue the
program if plugged back in straight away.
5