Care And Cleaning; Service And Customer Care - Kenwood BM25 Instructions Manual

care and cleaning

IMPORTANT: unplug the Bread Maker and allow
to cool before cleaning.
l
Do not immerse either the Bread Maker body or
the outside base of the bread pan in water.
l
Do not use a dishwasher to clean bread pan.
Dishwashing can damage the non-stick properties
of the bread pan allowing bread to stick during
baking.
l
Do not use abrasive scouring pads or metal
implements.
l
Clean the bread pan and the kneader
immediately after each use by partially filling the
pan with warm soapy water. Leave to soak for 5 to
10 minutes. To remove the kneader, turn
clockwise and lift off. Finish cleaning with a soft
cloth, rinse and dry.
If the kneader cannot be removed after 10
minutes, hold the shaft from underneath the pan
and twist back and forth until the kneader is
released.
l
Use a soft damp cloth to clean the outside and
inside surfaces of the Bread Maker if necessary.
l
The lid can be lifted off for cleaning.

service and customer care

l
If the cord is damaged it must, for safety reasons,
be replaced by KENWOOD or an authorised
KENWOOD repairer.
l
If you experience any problems with the operation
of your appliance, before requesting assistance
refer to the "troubleshooting guide" section in the
manual or visit www.kenwoodworld.com.
l
Please note that your product is covered by a
warranty, which complies with all legal provisions
concerning any existing warranty and consumer
rights in the country where the product was
purchased.
l
If your Kenwood product malfunctions or you find
any defects, please send it or bring it to an
authorised KENWOOD Service Centre. To find up
to date details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the website specific to
your Country.
l
Designed and engineered by Kenwood in the UK.
l
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN
DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority
differentiated waste collection centre or to a dealer
providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment
and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As
a reminder of the need to dispose of household
appliances separately, the product is marked with a
crossed-out wheeled dustbin.
6