3.8.5 Power On by Modem
When enabled, an input signal on the serial Ring Indicator (RI) line (in
other words, an incoming call on the modem) awakens the system from
a soft off state. The Choice: Enable, Disable.
3.8.6 Power On by Alarm
When enabled, you can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The
Choice: Enable, Disable.
3.9 PnP/PCI Configurations
3.9.1 PnP OS Installed
This features allows you to install the PnP OS. The commands are
"yes" or "no."
3.9.2 Reset Configuration Data
Note:
42
PCA-6004 User's Manual
This is left "Disabled." Select "Enabled" to reset
Extended System Configuration Data (ECSD) if you
have installed a new add-on and your OS won't boot
and you need to reconfigure.
Figure 3-8: PnP/PCI configurations screen