Table of Contents
Advertisement
To install the bracket, find an empty slot in your chassis. Unscrew the
plate that covers the end of the slot. Screw in the bracket in place of
the plate. Next, attach the flat-cable connector to CN4 on the CPU card.
Wire 1 of the cable is red or blue, and the other wires are gray. Make
sure that wire 1 corresponds to pin 1 of CN4. Pin 1 is on the upper right
side of CN4.
2.4
USB Port (CN6)
The PCA-6004 provides two USB (Universal Serial Bus) interfaces,
which give complete Plug & Play and hot attach/detach for up to 127
external devices.The USB interface complies with USB Specification
Rev. 1.0 and is fuse-protected.
The USB interface is accessed through a 10-pin flat-cable connector,
CN6. The adapter cable has a 10-pin connector on one end and two
USB connectors on the bracket.
The USB interface can be disabled in the system BIOS setup.
2.5
VGA Connector (CN7)
The PCA-6004 includes a AGP SVGA interface that can drive conven-
tional CRT displays. CN7 is a standard 15-pin D-SUB connector
commonly used for VGA. Pin assignments for CRT connector CN7 are
detailed in Appendix B.
1 6
PCA-6004 User's Manual
CN6
Pin 1
CN7
Advertisement
Table of Contents
