5.4 Windows 9X Drivers Setup
Procedure
Note 1:
Note 2:
1. In the "Windows" screen, click on "Start" and select "Settings".
Then click on the "Control Panel" icon to select "System".
5 4
PCA-6004 User's Manual
If you are using Windows 98SE, your system will find
the LAN device "PCI Ethernet Controller". You must
first remove this device from your system, and then
restart your computer. Then you will be ready to
install the correct driver by following the procedure
below.
The CD-ROM drive is designated as "D" throughout
this section.