Table of Contents
Advertisement
3.7.3
Video Off In Suspend
When system is in suspend, video will turn off.
3.7.4
Modem Use IRQ
This determines the IRQ in which the MODEM can use.The choices: 3, 4, 5, 7, 9, 10,
11, NA.
3.7.5
HDD Power Down
You can choose to turn the HDD off after one of the time intervals listed, or when the
system is in "suspend" mode. If the HDD is in a power saving mode, any access to it
will wake it up.
3.7.6
PowerOn By Modem
When Enabled, an input signal on the serial Ring Indicator (RI) line (in other words,
an incoming call on the modem) awakens the system from a soft off state. The
choices: Enabled, Disabled.
3.7.7
PowerOn By Alarm
When Enabled, your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode. The choices: Enabled, Disabled.
3.7.8
Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or
Secondary IDE 0 (1) is active. The choice: Enabled, Disabled.
3.7.9
FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD, COM port, or
LPT port is active. The choice: Enabled, Disabled.
3.7.10
PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if an interrupt occurs.
The choice: Enabled, Disabled.
19
PCM-4153 User Manual
Advertisement
Table of Contents
