Controlling The Soft Power Switch; Lcd Connector (Cn41); Lcd Inverter Power Connector (Cn42); Audio Interface (Cn43) - Advantech PCA-6004V-00A1 Manual

Important: Make sure that the ATX power supply can take at

2.13.2 Controlling the soft power switch

Users can also identify the current power mode through the system's
power LED (see Section 2.13.1).

2.14 LCD Connector (CN41)

This 40-pin connector supports an 18-bit TFT LCD.

2.15 LCD Inverter Power Connector (CN42)

The LCD inverter is connectoed to CN42 via a 5-pin connector to
provide +12 V power to the LCD display. The pin assignments for
CN42 can be found in Appendix B.
2.16 AC-97 Audio Interface (CN43)
This interface can be used to connect to the PCA-AUDIO audio
extension module for the audio function.
least a 720 mA load on the 5 V standby lead (5VSB).
If not, you may have difficulty powering on your
system and/or supporting the "Wake-on-LAN"
function.
Chapter 2 Connecting Peripherals 2 3