Table of Contents
Advertisement
Min Saving
Max Saving
User Defined
(Default)
3.7.4 Video Off Method
Use this to select the method to turn off the video. The choices are :
"Blank Screen", "V/H SYNC+ Blank", "DPMS".
3.7.5 Video Off In Suspend
When the system is in suspend mode, the video will turn off. The choices
are "No" and "Yes".
3.7.6 Suspend Type
The choices are : "Stop Grant", "PwrOn Suspend".
3.7.7 Modem Use IRQ
This determines the IRQ that the MODEM can use.The choices are: "3",
"4", "5", "7", "9", "10", "11", "NA".
3.7.8 Suspend Mode
Please refer to 3.7.3
3.7.9 Soft-Off by PWR-BTTN
If you choose "Instant-Off", then pushing the ATX soft power switch but-
ton once will switch the system to "system off" power mode. You can
choose "Delay 4 sec." If you do, then pushing the button for more than 4
seconds will turn off the system, whereas pushing the button momentarily
(for less than 4 seconds) will switch the system to "suspend" mode.
3.7.10 CPU THRM-Throttling
This field allows you to select the CPU THRM-Throttling rate. The
choices: "75.0%", "50.0%", and "25.0%".
3.7.11 PowerOn by Modem
To enabled or disable the function to power on the system via Modem
from the remotehost. The Choice : "Enabled", "Disabled".
3.7.12 PowerOn by LAN
This item allows you to power on the system by LAN. The choices:
"Enabled," "Disabled."
Minimum power management., Suspend Mode = 1 hr.,
and HDD Power Down = 15 min.
Maximum power management., Suspend Mode = 1 min.,
and HDD Power Down = 1 min.
Allows you to set each mode individually. When not dis-
abled, each of the ranges are from 1 min. to 1 hr. except
for HDD Power Down which ranges from 1 min. to 15
min, and disabled.
47
Chapter 3
Advertisement
Table of Contents
