Cpu L2 Cache Ecc Checking; First/Second/Third/Other Boot Device; Swap Floppy Drive; Boot Up Floppy Seek - Advantech PCA-6004V-00A1 Manual

3.4.3 CPU L2 Cache ECC Checking

Enabling allows CPU L2 cache checking. The commands are "Enabled"
or "Disabled."

3.4.4 First/Second/Third/Other Boot Device

The BIOS tries to load the OS with the devices in the sequence
selected.
Choices are: Floppy, LS/ZIP, HDD, SCSI, CDROM, LAN, Disabled.

3.4.5 Swap Floppy Drive

Logical name assignments of floppy drives can be swapped if there is
more than one floppy drive. The commands are "Enabled" or "Dis-
abled."

3.4.6 Boot UP Floppy Seek

Selection of the command "Disabled" will speed the boot up. Selection
of "Enabled" searches disk drives during boot up.

3.4.7 Boot Up NumLock Status

This feature selects the "power on" state for NumLock. The com-
mands are "Enabled" or "Disabled."

3.4.8 Gate A20 Option

Normal
Fast (Default)

3.4.9 Typematic Rate Setting

The typematic rate is the rate key strokes repeat as determined by the
keyboard controller. The commands are "Enabled" or "Disabled."
Enabling allows the typematic rate and delay to be selected.
The A20 signal is controlled by the keyboard
controller.
The A20 signal is controlled by the chipset.
Chapter 3 Award BIOS Setup 29