Atis Ch Group - Standard Horizon GX2400GPS Owner's Manual

20.2 ATIS CH GROUP

The GX2400GPS/E has ATIS feature may be turned ON or OFF for each
channel group.
Press & hold [
1.
2. Rotate the DIAL/ENT knob to select the channel
group (International, Canadian*, or USA) to change
the setting, and then press the [SELECT] soft key.
*(Depending on the region setting.)
3. Rotate the DIAL/ENT knob to select "ON" or "OFF".
4. Press the [ENTER] soft key to save the new setting.
5. To set the ATIS feature for another channel group,
repeat steps 2 through 4.
6. Press the [BACK] soft key to return to radio operation.
• The "Scan" and "Dual Watch" features are not available on the channel
group while the ATIS feature is turned on.
• The TX output power is set to "1 W" automatically on the following chan-
nels of the channel group while the ATIS feature is turned on.
CH 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, and 77
]  "ATIS SETUP"  "ATIS GROUP"
NOTE
123