16.8.2 Key Timer
Press & hold [
1.
2. Rotate the DIAL/ENT knob to select "KEY TIMER",
then press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select the desired time,
default is 10 seconds.
4. Press the [ENTER] soft key to store the selected setting.
5. Press the [CLEAR] key to return to radio operation.
16.9 RESET
The memory and the setup categories may be reset independently, or the
transceiver may be reset to the original factory settings.
Press & hold [
1.
2. Rotate the DIAL/ENT knob to select the desired cate-
gory from: "DSC/GM SETUP", "WAYPOINT SETUP",
"CHANNEL SETUP", "GPS SETUP", "CONFIGURA-
TION", "FACTORY" (all settings*
and "ATIS"*
"ATIS CODE"*
*
(The Individual Directory is also cleared.)
1
*
(GX2400GPS/E only)
2
For details on resetting "USER MMSI" and "ATIS CODE", refer to "16.9.1 Reset
the USER MMSI and ATIS CODE".
3. Press the [SELECT] soft key.
4. Press the [YES] soft key. (To cancel, press the [NO]
soft key.)
5. Press the [OK] soft key.
6. Press the [CLEAR] key to return to radio operation.
102
] "CONFIGURATION" "SOFT KEY"
] "CONFIGURATION" "RESET"
will be initialized), "USER MMSI", or
2
.
2
except the "MMSI"
1