Table of Contents
Advertisement
7.2 ATIS CH GROUP
The HX290E has the capability to turn on and off the ATIS feature for each
channel group.
1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise.
2. Hold down the
while still holding down the
3. "SEt
SEt" will appear on the display, indicating the Menu
SEt
SEt
SEt
("Set") Mode has been activated.
4. Press the
Menu item "Ats
Ats".
Ats
Ats
Ats
5. Press the
ternational, Canadian, or USA) you wish to change the
setting.
6. Press the
7. If you want to set the ATIS feature to another channel
group, repeat step 5 and 6.
8. After completing your programming, turn the transceiver
off and on by rotating the VOL knob.
HX290E
key, and then turn on the transceiver
key, repeatedly if necessary to select the
or
key to select the channel group (In-
key to select "On
On" or "Off
On
On
On
key.
Off
Off
Off".
Off
Channel Group
Page 27
Advertisement
Table of Contents
