Standard Horizon GX2400GPS Owner's Manual page 95

5. Press the [◄] or [►] key to select the letters of the
name of the vessel or person you want to reference
in the ignore vessel.
6. Press the [SELECT] soft key to store the first letter in
the name and step to the next letter to the right.
7. Repeat steps 5 and 6 until the name is complete.
The name can consist of up to eleven characters, and if you do not use all
fifteen characters, select "→" to move to the next space. This method can
also be used to enter a blank space in the name.
If a mistake was made entering in the MMSI number, press the [◄] or
[►] key to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform step 5.
8. When finished entering the name (using eleven characters or less), press
the [FINISH] soft key to advance to the MMSI number entry.
9. Rotate the DIAL/ENT knob to select "MMSI:", then
press the [SELECT] soft key.
10. Press the [◄] or [►] key to select numbers, 0 - 9. To
enter the desired number and move one space to the
right by pressing the [SELECT] soft key. Repeat this
procedure until all nine space of the MMSI number are
entered.
If a mistake was made entering in the MMSI number, press the [◄] or
[►] key to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform step 10.
11. When the MMSI number is entered, press the [FINISH] soft key.
12. To store the entered data, rotate the DIAL/ENT knob
to select "SAVE", then press the [SELECT] soft key.
13. To enter another AIS vessel, repeat steps 3 through 12.
14. Press the [CLEAR] key to return to radio operation.
93