Standard Horizon GX2400GPS Owner's Manual page 69

2. Rotate the DIAL/ENT knob to select "HISTORY" or
"MEMORY", then press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select the name in the
directory, then press the [SELECT] soft key.
4. If you want to change the position displayed, press
the [POS/TM] soft key to go to the position information
input screen. After inputting new position information,
press the [FINISH] soft key to confirm.
5. Press the [YES] soft key to send your position to the
selected vessel.
6. Press the [QUIT] soft key to return to radio operation.
DSC Position Report Call by Manually Entering an MMSI
This feature allows you to send your position to another vessel by manually
entering the MMSI of the ship you want to send your position to.
[ ]  "DSC CALL"  "POS REPORT"
1.
2. Rotate the DIAL/ENT knob to select "NEW ID", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select the first number of
the MMSI of the vessel you want to contact, then press
the [SELECT] soft key to step to the next number.
4. Repeat step 3 to complete the MMSI number.
If a mistake is made entering in the MMSI number,
press the [◄] or [►] key to select "←" or "→", press
the [SELECT] soft key until the incorrect character is
selected, then perform step 3.
5. When finished entering the MMSI number, press the [FINISH] soft key.
6. If you want to change the position displayed, press the [POS/TM] soft key
to go to the position information input screen. After inputting the new posi-
tion information, press the [FINISH] soft key to confirm.
67