Atis Ch Group - Standard Horizon HX300E Owner's Manual

7.2 ATIS CH GROUP

The HX300E has the capability to turn on and off the ATIS feature for each
channel group.
1. Hold down the
change from USA, to International, and to Canadian with each press.
2. "U" appears on the LCD for the USA, "I" appears for
the International, and "C" appears for the Canadian.
3. Turn the transceiver off by press and holding the
key.
4. Hold down the
transceiver while still holding down the
key.
5. Press the
6. Turn the transceiver off by press and holding the
key to save the new setting.
7. If you want to set the ATIS feature to another channel
group, repeat above steps.
Page 30
key and press the
and key, and then turn on the
/ key to select " on ".
key. The channel group will
and
HX300E