Adding a Waypoint
Press & hold [
1.
2. Rotate the DIAL/ENT knob to select "ADD", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "NAME:", then
press the [SELECT] soft key.
4. Enter the waypoint name by pressing the [◄] or [►]
key and the [SELECT] soft key.
When finished entering the name (using fifteen characters or less), press
the [FINISH] soft key.
5. Rotate the DIAL/ENT knob to select "POSITION:", press the [SELECT]
soft key, then enter the waypoint coordinates.
When finished entering the position, press the [FINISH] soft key.
6. Rotate the DIAL/ENT knob to select "SAVE", then press
the [SELECT] soft key to save the waypoint into memory.
7. Press the [CLEAR] key to return to radio operation.
Editing a Waypoint
Press & hold [
1.
2. Rotate the DIAL/ENT knob to select "EDIT", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select the waypoint to
be edited, then press the [SELECT] soft key to show
the waypoint input display.
4. Rotate the DIAL/ENT knob to select "NAME:" or
"POSITION:", then press the [SELECT] soft key.
5. Press the [◄] or [►] key to select "←" or "→", press the [SELECT] soft key
until the character to be changed is selected, then enter a new character.
6. Repeat step 5 until the waypoint is updated.
When finished editing, press the [FINISH] soft key.
7. Rotate the DIAL/ENT knob to select "SAVE", then
press the [SELECT] soft key to store the edited
waypoint into memory.
8. Press the [CLEAR] key to return to radio operation.
78
] "WAYPOINT SETUP" "WAYPOINT DIRECTORY"
] "WAYPOINT SETUP" "WAYPOINT DIRECTORY"