NetCol8000-A(045, 055, 060, 090, 120) In-room Air
Cooled Smart Cooling Product
User Manual
1.
2.
Step 4 Secure four slanting beams to the base using eight M10x30 stainless steel bolts, as
shown in
Figure 4-44 Installing slanting beams
Step 5 Secure the three beams on the top to the base using six M10x30 stainless steel
bolts, as shown in
Issue 05 (2020-10-10)
Lift the outdoor unit from the front onto the first-layer base, as shown by (1)
in
Figure
4-43.
Secure the outdoor unit to the base using four corner fittings on the side
panel. One M10x30 stainless steel bolt is used on the base side, and two
M6x16 stainless steel bolts are used on the outdoor unit side, as shown in
Figure
4-43.
Figure
4-44.
Figure
Copyright © Huawei Technologies Co., Ltd.
4-45.
4 System Installation
88