Huawei NetCol8000-A045D User Manual page 215

NetCol8000-A(045, 055, 060, 090, 120) In-room Air
Cooled Smart Cooling Product
User Manual
Step 2 Set LAN parameters.
1.
2.
3.
4.
Issue 05 (2020-10-10)
c. Configure the PC IP address and the IP address of the unit in the same
network segment.
If the IP address of the unit is 172.017.xxx.xxx, subnet mask is
255.255.255.000, and default gateway is 172.017.xx.xx, set the PC IP
address to 172.017.xxx.xxx, subnet mask to 255.255.255.000, and default
gateway to 172.017.xx.xx.
NO TE
The WAN IP address cannot be in the 192.168.245.X, 192.168.246.X, or
192.168.248.X network segment.
NO TE
● If the unit connects to a LAN and a proxy server has been selected, perform
and Step 2.4.
● If the unit connects to the Internet, and the PC in a LAN accesses the Internet over a
proxy server, do not perform
WebUI.
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
Figure 7-1 Setting Internet options
(Optional) Click the Connections tab and select LAN settings.
(Optional) Under Proxy server, deselect Use a proxy server for your LAN.
Copyright © Huawei Technologies Co., Ltd.
Step 2.3 or Step 2.4. Otherwise, you will fail to access the
7 WebUI
Step 2.3
205