Table of Contents
Advertisement
NFPA 72 Auxiliary Fire Alarm System
NFPA 72 Remote Station Protective Signaling System
Notes:
1.
Cut Jumper JP30 on the RP-2001 main circuit board to supervise placement of the 4XTM
module.
2.
Refer to "4XTM Transmitter Module Installation" on page 31 for detailed information.
Cutting TBL Jumper allows the
reverse polarity circuit to open with
a system trouble condition if no
alarm condition exists.
Figure C.3 Remote Station Connection Using 4XTM Module
RP-2001 Series Manual — P/N 52985:D5 1/26/2017
RS82 Remote Station Receiver UL listed.
Refer to Instruction Manual for Remote Station Receiver Model RS82.
NFPA Standard-Specific Requirements
Polarity Shown is
Normal Standby
+
-
+
Power-limited
-
(Dummy load with a 4.7KΩ ¼ watt resistor
when no connection is made)
4XTM Transmitter Module
115
Hide quick links:
Advertisement
Table of Contents
