Hisense HME8C58 User Manual page 11

Film Clip 3, Film Clip 4, and Film Clip 5 modes. You can press the BACK button to cancel
the current mode.
Film Clip 1
SCREEN LOCK button. Press and hold this button for 3s to lock the screen. Press and hold
the button for 3s again to unlock the screen.
It is used to enter and exit the standby mode.
Note

When the monitor is in standby mode, you can press any button to awake it.

If no operation is performed, the shortcut operation page automatically disappears in 3s and the
Settings menu automatically disappears in 15s.

If you do not need to use the monitor for a long time, press Power to power off the monitor or
remove the power plug to save the energy.
Installation
Film Clip 2 Film Clip 3
7
Film Clip 4 Film Clip 5