ThyssenKrupp TW160 Operating Manual page 70

Operating manual
TW160 drive
WARNING
Risk of scalding!
Caution: hot oil represents a risk of scalding!
 Be particularly careful.
3. Close the oil drain after discharging the gear with sealing tape and the cap.
4. Fill the machine with the prescribed oil quantity through the upper opening on
the gear housing (fill opening cap, see Fig. 3.2-1
5. Check the level with the oil dipstick (see Fig. 8.3-1).
Only rest the oil dipstick, do not screw in.
6. Enter the date for the next oil change in the type plate on the gear housing.
Item Designation
Oil filling hole
1
see Fig. 3.2-1 item 9
3 Oil drain
Fig. 8.3-1
8.3.3 Checking the oil level
Only place the oil dip stick (red cap) in position to check the oil level; do not screw in.
The oil level should be between the two markings.
thyssenkrupp Aufzugswerke
1
2
3
Item Designation
2 Oil dip stick
70
Servicing and Maintenance
Version 03/2019