ThyssenKrupp TW160 Operating Manual page 34

Operating manual
TW160 drive
The complete machine base frame comprises the following components:
 Machine base frame made from welded rolled profiles
 Hole pattern for machine mounting as per order, depending on DT and ASL
 Pedestal bearing (bolted) for the rope pulley holder with axle; version based on
the rope pulley used
 Rope pulley D450, 540 or 640
 Supports (6 pcs. bolted) for mounting the insulation elements.
 It is possible through appropriate mounting of the bolted supports to position the
pulley hub on the right or left in the machine base frame.
Technical data
 Weight of machine base frame
rope pulley version [mm]
Table 4.5-1
Project planning dimensions
 Project planning dimensions, see dimension sheet
4.5.3 Assembly, machine base frame TW160 - 62 340 03 10 0
Machine base frame version with rope pulley on concrete foundations - depending on
whether the rope pulley position is on the left or right for use in:
 Installations with 1:1 rope suspension and elevator car - counterweight rope
distance ASL = 795  1400 mm in conjunction with traction sheaves dia. 640,
720 and 800 mm
 The versions D450-7/8x10. D540-7/8x13 and D640 (for rope pulleys, see factory
standard 60 720 12 00 0) are used for the rope pulley. The rope pulleys have
maintenance-free rolling bearings.
thyssenkrupp Aufzugswerke
D450
D540
D640
weight incl. rope pulley
m
420
kg 470
550
34
Technology
TW160_31007_ENG
Version 03/2019