ThyssenKrupp TW160 Operating Manual page 25

Operating manual
TW160 drive
4.1.4 Emergency brake
More detailed information as well as technical information for setting up and operation
of machines with NBS emergency brake can be found in a separate operating
manual. These are delivered with drives with emergency brake system equipment.
The part number for the German instructions is:
The part number for the English instructions is:
The part number for the French instructions is:
4.1.5 Traction sheave
Different versions of traction sheave are used, depending on the location of the
machine.
 Standard version: traction sheave position in the machine room
 Special version SA4/9 - vapour-proof partition wall in the machine room / traction
sheave position in the shaft
The traction sheaves for the standard versions differ from the SA4/9 versions in the
dimensional assignment of traction sheave middle to cone and rim width. The use of
SA4/9 versions in machines for the machine room - and vice versa - is not possible.
machine version
diameter - DT
rim width - B
max. number of grooves - z x d
groove type
vee groove angle
weight
material
1)
Version in accordance w ith product description groove profiles w ith hardened groove flanks (min. 50 HRc).
2)
With minimum groove clearance - RAmin in accordance w ith product description groove profiles
Table 4.1-4
thyssenkrupp Aufzugswerke
name
unit
mm
mm
2)
°
kg
65 990 01 86 0
65 990 02 86 0
9710 000 9229
technical data
standard
640 720 800
180
10 x 10
9 x 11/12
8 x 13 / 8 x 1/2"
7 x 14/15
7 x 16 / 7 x 5/8"
seat / vee groove
depends on project specs
140 160 190
special alloyed EN-GJL 250
25
Technology
SA 4/9
640 720 800
160
9 x 10
8 x 11/12
7 x 13 / 7 x 1/2"
6 x 14/15
6 x 16 / 6 x 5/8"
1)
1)
130 150 180
TW160_30301_ENG
Version 03/2019