Table of Contents
Advertisement
ADJUSTMENTS
CONSISTENT COVERAGE
To insure consistent coverage, make sure each broadcast pattern slightly overlaps the previous
broadcast pattern as shown in figure below. The approximate broadcast widths for different
materials are shown in the application chart.
3.Adjust the handle to ensure the
adjustable plate is fully open or closed.
If an adjustment is required, loosen the
M6x40 screw and M6 lock nut. Pull the
control rod & make sure the adjustable
plate operates correctly. Then retighten
the screw & bolt.
1.When the handle is pushed to
the front (1 to 4 on gauge), the
adjustable plate is fully open
2.When the handle is pushed to
the back (0 on the gauge), the
adjustable plate is fully closed
Advertisement
Table of Contents
