Table of Contents
Advertisement
10.1 Hand control use
Before lowering the section you need to release the brake of the two wheels on the head or foot panel
side, to avoid possible damages to the floor.
Issue 3: 20/04/20
Backrest adjustment
Press this button to change the angle of the backrest.
Height adjustment of the mattress base
Press this button to change the height of the mattress base. When the
height is adjusted there is an automatic horizontal positioning of the
mattress base in the highest and/or lower position.
Leg support adjustment
Press this button to change the angle of the leg support.
Backrest and leg support combined adjustment (Auto-Contour)
Press this button to change the angle of the backrest and the angle of
the leg support simultaneously.
Angle adjustment of feet – head section (Trendelenburg Tilt)
Press this button to lower the foot or head section independently. When
the height is adjusted there is an automatic horizontal adjustment of the
mattress base if lowered at the feet in the highest position and/or in the
lowest one.
Page 18 of 32
Advertisement
Table of Contents
