Safety Information - Maintenance And Inspection - Ultimate Healthcare Soprano Bariatric User Manual


Only perform assembly work using suitable tools.

Only perform the work described if you are familiar with handling the required tools.
Safety information – maintenance and inspection
5.3
Only allow maintenance and inspection work to be carried out by or under the supervision and
guidance of trained expert personnel who, on the basis of their specialist training, knowledge and
experience - in addition to knowledge of all the relevant regulations - are capable of evaluating the
condition of the bed and of recognising any possible effects and hazards.
Always read the relevant chapters of this User Manual thoroughly before carrying out maintenance
and inspection work.
Any damage resulting from non-observance of this User Manual is excluded from any liability of
the manufacturer.

Always carry out a function test following maintenance work and inspections.

When operating the actuator motors, ensure that the bed cabling cannot be pinched,
overstretched or kinked.

Immediately remove faulty/defective beds from operation and secure them against
unauthorised use. Disconnect the mains plug from the wall socket.

Only use original spare parts from Ultimate Healthcare.

Always carry out the prescribed maintenance and inspection work at the specified
intervals, see Section 16 Maintenance and Inspection.

Do not carry out any alterations to the electrical or mechanical fittings supplied with the
bed unless authorised to do so by the manufacturer. Unauthorised alterations lead to any
liability of the manufacturer becoming null and void.

Only perform maintenance and inspection work using suitable tools.

Do not open electrical components.
Issue 3: 20/04/20
Caution: Risk of Accidents!
Caution
Caution: Hazards due to electrical and mechanical faults!
Page 11 of 32