Table of Contents
Advertisement
6. Environmental Conditions
Operating temperature range
Relative Humidity (RH)
Altitude range (above mean sea level)
The IP (liquid and dust ingress) rating for the control module on the Cura II and Cura II Supreme
medical beds is IPX4. The Cura II and Cura II Supreme beds are designed for medical purposes only.
Electrical installations must comply with your local electrical installation requirements.
7. Installation and Set-Up
Remove packaging; all cardboard is recyclable; carefully dispose of all plastic packaging to avoid risk
of suffocation; recycle plastics where facilities exist.
• The bed is supplied disassembled.
• The installation must be carried out by a minimum of two persons.
Packaging units:
Box 1: Back rest section of mattress platform complete with actuator, side rail end caps, mattress
retainers and mattress platform connecting bars.
Box 2: Leg rest section of mattress platform complete with actuator, main electrical control unit and
hand control unit.
Box 3: Headboard Bed end (shorter connecting bars) with a Hi-Lo actuator.
Box 4: Footboard Bed end (longer connecting bars for extending purposes) with a Hi-Lo actuator.
Box 5: Six wood effect aluminum bars to form the bed side rails.
Issue 3: 20/04/20
Caution: Read these instructions carefully before attempting to assemble the bed.
Min
0
10
C
10%
0m
Max
0
40
C
60%
3,000m
Page 12 of 32
Advertisement
Table of Contents
