Ultimate Healthcare Heritage II Digital Turn Quick Reference Manual

Heritage II Digital Turn
Quick Reference Guide
Please refer to the product User Manual for full instructions for use.
30
Control Panel Lock Out
To unlock panel:
• Press & hold for 3 seconds to unlock control panel.
To lock panel:
• To lock out the control panel press the Lock Out
button and all functions will be locked.
• If the control panel is not used for a period of 30
seconds it will automatically lock out and inhibit
the use of the functions.
Comfort Control
The Soft and Firm buttons allow adjustment of
• When pressing the Firm button, the output pressure
will increase to provide a higher pressure output
and thus increased support.
• When pressing the Soft button, the output
pressure will be decreased to provide a lower
pressure output and thus increased comfort.
Auto-Detection -
detecting patient weight (distribution)
Simultaneously pressing the Soft and Firm buttons on the
•
control panel will manually activate Auto-Detection.
•
will start detecting the patients weight
internal pressures appropriately. The system will
continuously check this every 2 hours.
Auto Firm Mode
• Pressing the Auto Firm
cells to a single pressure setting.
• The system will automatically return to
Last Mode Of Operation after 20 minutes.
Function Mode button
• Pressing the Mode button allows you to cycle
between the different modes available such as
Alternating Static
A Full Risk Assessment should be completed before using this System
255 kg
165 205
130
100
75
50
to set
Constant Low Pressure
-Please refer to User Manual for guidance
www.ultimatehealthcare.co.uk | Tel: 0333 321 8996
CLP
Mode
Alternating Mode
• Alternating mode is the default mode for the
• The alternating cycle will continue at the selected
cycle time until another mode is selected.
Static Mode
• Pressing the Mode button until the Static indicator
illuminates puts the system into Static mode.
• The system will automatically return to
Last Mode Of Operation after 20 minutes.
• Pressing the Mode button until the CLP indicator
illuminates puts the system into Constant Low
Pressure mode.
•
Alternating Cycle Time Selection
•
To select press Cycle button until required cycle
•
time is displayed in LCD screen.
Alarms
Alarm Mute
The Alarm Mute button temporarily resets the
audible Low Pressure/Power Failure/Service
alarms. Should the situation not be resolved and
the fault condition continues the alarm will resume.
Low Pressure Alarm
• Upon detection of low pressure, an audible alarm will be
heard and the Low Pressure indicator will illuminate.
Power Failure Alarm
• If mains power is removed from power unit or the power cable
is unplugged without turning the power unit OFF, an audible
alarm will sound and the Power Failure indicator will illuminate.
Service Alarm
• Should your system develop a fault condition whilst in use,
an audible alarm will be heard and the Service indicator will
illuminate.
Mode