8. Control Panel Operation Guide
The Control Panel of the power unit is used to make adjustments to the mattress and also indicates
fault conditions/service requirements. These are either visual (indicator lights) or audible.
1
Auto detection
2
Comfort Control Buttons
3
Comfort Setting Indicators
4
Control Panel Lockout Button & Indicator
5
Function Mode Selection Button
Alternate, Static and Constant Low Pressure (CLP)
8.1
Operate / standby
Press the Operate / Standby button to turn the power unit ON. Press again to turn
OFF/Standby the power unit.
Note: The power switch on the side of the power unit must be turned ON.
Issue 5 – 16/12/2020
6
Auto-Firm & Indicator
7
Operate / Standby Button & Indicators
8
Cycle Time Selection Button (Alternate)
9
Cycle Time Display
10
Alarm Mute Button & Indicators
Page 11 of 28