Safety Information - Maintenance And Inspection - Ultimate Healthcare Cura II User Manual

Caution: Risk of Accidents!

Only perform assembly work using suitable tools.

Only perform the work described if you are familiar with handling the required
tools.
Safety information – maintenance and inspection
5.3
Only allow maintenance and inspection work to be carried out by or under the supervision and
guidance of trained expert personnel who, on the basis of their specialist training, knowledge
and experience - in addition to knowledge of all the relevant regulations - are capable of
evaluating the condition of the bed and of recognising any possible effects and hazards.
Always read the relevant chapters of this User Manual thoroughly before carrying out
maintenance and inspection work.
Any damage resulting from non-observance of this User Manual is excluded from any liability
of the manufacturer.
Caution

Always carry out a function test following maintenance work and inspections.

When operating the actuator motors, ensure that the bed cabling cannot be pinched,
overstretched or kinked.
Caution: Hazards due to electrical and mechanical faults!

Immediately remove faulty/defective beds from operation and secure them against
unauthorised use. Disconnect the mains plug from the wall socket.

Only use original spare parts from Ultimate Healthcare.

Always carry out the prescribed maintenance and inspection work at the specified
intervals, see Section 16 Maintenance and Inspection.

Do not carry out any alterations to the electrical or mechanical fittings supplied with
the bed unless authorised to do so by the manufacturer. Unauthorised alterations lead
to any liability of the manufacturer becoming null and void.

Only perform maintenance and inspection work using suitable tools.

Do not open electrical components.
Issue: 6: 08/11/2018
DRAFT
Page 10 of 40