Table of Contents
Advertisement
Inno Pocket Scan
Locate the fuse holder is located at the rear of unit next to the power cord. Using a phillips head
screwdriver, remove the fuse holder. Remove the used fuse and replace with a matching fuse. Re-
install the fuse holder.
Inno Pocket Scan
Fixture Cleaning: Due to fog residue, smoke, and dust, cleaning the internal and external optical
lenses and mirror should be carried out periodically. Cleaning frequency depends on the environ-
ment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use, cleaning
on a monthly basis is recommended in order to ensure longevity and crisp output.
•
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
•
Use a brush to wipe down the cooling vents and fan grill.
•
Clean the external optics with glass cleaner and a soft cloth every 20 days.
•
Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
•
Always be sure to dry all parts completely before plugging the unit back in.
Inno Pocket Scan
Listed below are common problems that you may encounter, along with potential solutions.
No light output from the unit:
•
Check that the external fuse has not blown. The fuse is located on the rear of the unit.
•
Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound:
•
Low frequencies (bass) should cause the unit to react to sound. Quiet or high pitched sounds,
such as tapping on the microphone, may not activate the unit.
ADJ Products, LLC - www.adj.com - Inno Pocket Scan User Manual Page 18
Fuse Replacement
Cleaning
Trouble Shooting
Advertisement
Table of Contents
