ADJ INNO SPOT PRO User Instructions

ADJ INNO SPOT PRO User Instructions

14 channel, dmx intelligent, moving head, led fixture

Advertisement

INNO SPOT PRO
User Instructions
Rev. 1/14
©2013 ADJ Products, LLC all rights reserved. Information,
specifications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all affiliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsufficient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn off all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INNO SPOT PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ADJ INNO SPOT PRO

  • Page 1 ©2013 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
  • Page 2 The Inno Spot Pro is a 14 channel, DMX intelligent, • Power Cord Daisy Chain - See page 20 for more info moving head, LED fixture. The Inno Spot Pro can operate as a stand • Internal Microphone alone fixture or in a Master/Slave configuration. The Inno Spot Pro has •...
  • Page 3: Safety Precautions

    See page 25 for cleaning details. • Heat -This fixture should be situated away from heat sources such The Inno Spot Pro is fully operational in two different mounting posi- as radiators, heat registers, stoves, or other appliances (including tions, hanging upside-down from a ceiling or set on a flat level sur- amplifiers) that produce heat.
  • Page 4 Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): The Inno Spot Pro can be controlled via DMX-512 proto- col. The Inno Spot Pro is a 14 channel DMX unit. The DMX address is set electronically using the controls on the front Screw one clamp via a M12 screw and nut onto the Omega panel of the unit.
  • Page 5 120 Ohm 1/4 W) between PIN 2 (DMX-) Figure 4 and PIN 3 (DMX +) of the last fixture. ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 8 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 9...
  • Page 6: Dmx Address

    This will let you set unit as a slave in a master/slave configuration. 1. Press the MENU button until “Slave Mode” is displayed, ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 11 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 10...
  • Page 7 2. Press the UP or DOWN buttons to adjust the sensitivity level. output intensity. The sensitivity level can be adjusted between 0 (the lowest) and ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 12 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 13...
  • Page 8: Fixture Time

    ENTER. 2. The running time of the fixture will now be displayed. Press MENU to exit. ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 14 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 15...
  • Page 9: Color Offset

    ENTER to confirm. Press the MENU button for one second to exit. to exit. ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 16 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 17...
  • Page 10: Operation

    A DMX controller allows you to create unique programs tailored to your individual needs. 1. The Inno Spot Pro is a 14 channel DMX fixture. See pages 21-23 for detailed description of the DMX values and traits.
  • Page 11 GOBO WHEEL ROTATION SLOW - FAST 190 - 193 STOP Slow Blinking) 194 - 255 GOBO WHEEL ROTATION FAST - SLOW ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 20 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 21...
  • Page 12 BLACKOUT W/ GOBO CHANGE 120 - 129 NO BLACKOUT W/ GOBO CHANGE 130 - 199 NOTHING ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 22 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 23...
  • Page 13: Troubleshooting

    1. Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high pitched sounds may not activate the unit. ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 24 ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 25...
  • Page 14: Warranty

    Dimensions: 11.5”(L) x 6.75”(W) x 16.75”(H) duct only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested 288mm x 167mm x 425mm repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States.

Table of Contents