Porter-Cable OMNIJIG 55160 Instruction Manual page 8

®
OMNIJIG ACCESSORIES
An accessory kit available for the OMNIJIG
help you cut box joints (16" or 24"). In addition,
different templates are available: a 16" variable
finger template; a 24" single-pass half-blind/
sliding tapered dovetail template; and 24" and 16"
miniature variable finger templates. The miniature
templates are designed to cut smaller workpieces
for more decorative joints.
Here's what is included in each accessory
package. The catalog numbers for each size are
included below.
Box joint accessory kits (Fig. 9)
77245 (For use with the 16" and 24" variable
finger templates, 77241 or 55161)
55165 (For use with the 16" and 24" miniature
finger templates, 77246 or 55166)
77245
1. Straight bit (S3)
2. Two sets of double stops ("Box left" and
"Box right")
3. 5 template guides (G3.1, G3.2, G3.3, G3.4
and G3.5)
4. Box Joint Setup Guide (not shown)
55165
1. Straight Bit (S0)
2. Two sets of double stops ("Mini Box left"
and "Mini Box right")
3. 7 Template Guides (G6, G6.1, G6.2, G6.3,
G6.4, G6.5, G9)
4. Box Joint Setup Guide (not shown)
Single-pass half-blind/sliding tapered dovetail
template (Fig. 10)
(24" - 77248; 16" - 55168)
1. Template
2. Left and right stops (labeled C2)
® can
1
77245
2
1
3
Fig. 9
1
Fig. 10
55165
2
3
2