Operation For Mma Mode - Linde BOC RAPTOR Operating Manual

15. MMA mode (Electrode not configured)
17. MMA mode (without VRD)
19. Adjusting parameters (Electrode type)

7.2 Operation for MMA mode

Set welding mode
Press the welding mode button
panel to choose MMA mode. MMA symbol will
show on the display.
Set VRD function
Under the MMA mode, press the menu button
for 3 seconds, and then release to turn off
(Figure 17) or turn on (Figure 18) the VRD function.
16. MMA mode (Electrode configured)
18. MMA mode (with VRD)
Adjusting parameters
on the front Under the MMA mode, select the parameter
(Figures 19) by pressing the menu button
and then adjusting the parameter value using the
adjustment knob .
NOTE: The configured parameter value will be
automatically saved.
,
21