Filling The Device - Lauda P 10 Operation Manual

5.2

Filling the device

V04REV14
The water must be free of impurities. Water with iron content is unsuit-

able due to rust formation and untreated river water is unsuitable due to
algae growth.
The addition of ammonia is not permitted.

LAUDA is not liable for damages resulting from the use of unsuitable heat
transfer liquids. Approved heat transfer liquids Ä Chapter 5.1 "LAUDA heat
transfer liquids" on page 59.
DANGER!
Risk of hot heat transfer liquid overflowing
Fire
A connecting hose with a collecting vessel must be

attached to the overflow.
The collecting vessel and connecting hose must be designed

to withstand the maximum temperature of the heat transfer
liquid.
Avoid ignition sources in the vicinity of the collecting vessel.

WARNING!
Splashing heat transfer liquid
Eye damage
Always wear suitable safety glasses when working on the

device.
WARNING!
Overflow of heat transfer liquid
Electric shock
Do not overfill the device. Observe the level display and the

thermal volume expansion of the heat transfer liquid.
WARNING!
Spraying of heat transfer liquid
Electric shock
Avoid spraying heat transfer liquid.

PRO bath thermostats and circulation thermostats 61 / 130