Configuring The Ethernet Interface - Lauda P 10 Operation Manual

4.4.2 Configuring the Ethernet interface

Technical data of the Ethernet interface
Manually configure LAN settings
V04REV14
Data
Ethernet - standard
A glossary with all the relevant explanations appears at the end of the docu-
ment.
PC control
The PC control menu item enables the control for a PC or control sta-

tion. You can activate this function if you wish to control and monitor
the thermostat from a control station.
Before the constant temperature equipment and control station can be
operated together in a local network (LAN), the Ethernet interface must be
configured.
The Ethernet interface can be configured in two different ways:
Automatically
obtain LAN
settings
Manually con-
figure LAN
settings
1. Switch on the constant temperature equipment.
2. Press any button on the Base unit to display the Home window.
3. Press the [input button] to open the menu.
4.
Select the menu items from Settings  Basic settings  Ethernet
 LAN settings  DHCP client using the cursor keys and press [OK]
to confirm.
The options [Off] and [On] appear on the display.

5. Select the option [Off] and press [OK] to confirm.
The Local IP address window opens. The cursor marks the input

field.
6. Press [OK] to confirm the input field.
The Local IP address input window opens.

7. Enter the numerical values, for example 120.0.0.13. The numerical
values are entered byte by byte. From left to right, from byte 4 to
byte 1. Press [OK] to confirm each byte.
8. Once you have entered the numerical values, press the [Apply]
softkey.
The [Local mask] input window opens.

9. Enter the numerical values. The numerical values are entered byte by
byte. From left to right, from byte 4 to byte 1. Press [OK] to confirm
each byte.
PRO bath thermostats and circulation thermostats
- In order for this to work, a DHCP server must be present
in the local network (LAN). If communication is direct,
the control station must support the auto IP standard.
- Manual configuration must be performed if a DHCP
server is not available, auto IP standard is not supported
or you wish to use the Ethernet interface with fixed IP
addresses.
Value Unit
10/100 MBit
37 / 130