Type Plate - Lauda P 10 Operation Manual

3.3.6 Type plate

Fig. 12: Type plate
V04REV14
The specifications on the type plate are described in more detail in the fol-
lowing table. Certain specifications depend on the device type and the device
options installed. Installed options are marked with a corresponding
addendum.
Specification
Type
Article-No.
Serial no.
Refrigerant I
Filling charge I
PS high pressure I
PS low pressure I
Refrigerant II
Filling charge II
PS high pressure II
PS low pressure II
Voltage
Power consumption
Protection level
Fuse
Class according to
DIN 12876-1
PRO bath thermostats and circulation thermostats
Description
Device type
Order number of the device
Serial number of the device
Designation of the refrigerant used in the
refrigerating machine, level 1
Filling charge of the refrigerant in the refriger-
ating machine, level 1
Maximum permitted operating pressure at the
refrigerant high-pressure side in the refriger-
ating machine, level 1
Maximum permitted operating pressure at the
refrigerant low-pressure side in the refrigerating
machine, level 1
Designation of the refrigerant used in the
refrigerating machine, level 2
Filling charge of the refrigerant in the refriger-
ating machine, level 2
Maximum permitted operating pressure at the
refrigerant high-pressure side in the refriger-
ating machine, level 2
Maximum permitted operating pressure at the
refrigerant low-pressure side in the refrigerating
machine, level 2
Device may only be operated with this supply
voltage and frequency
Maximum power consumption of the device
during operation
IP protection level of the device
Device fitted with automatic fuse
German standard for electrical laboratory
equipment
29 / 130