Reset Structure; Evm Supplies - Texas Instruments DRA72 Series User Manual

www.ti.com
Table 8 includes recommended and tested supplies for use with the EVM.
Manufacturer Part
Digi-Key Part Number Number
102-3417-ND SDI65-12-U-P5
62-1221-ND KTPS65-1250DT-3P-VI-C-
P1
102-3419-ND SDI65-12-UD-P5
SDI65-12-U-P6-ND SDI65-12-U-P6
SDI65-12-UD-P6-ND SDI65-12-UD-P6
External Power Supply Regulatory Compliance Certifications: Recommended selection and use of an
external power supply which meets TI's required minimum electrical ratings, in addition to complying with
applicable regional product regulatory and safety certification requirements, such as UL, CSA, VDE, CCC,
PSE, and so forth.
3.3

Reset Structure

The reset structure is shown in
PMIC (TPS65917-Q1). There are two push buttons for user-controlled resets. One is the power-on reset
(SW4) for a complete SoC reset. The other is for warm reset (SW5). The warm reset can also be sourced
from the MIPI-60 JTAG/Trace connector.
SPRUIB9 – December 2016
Submit Documentation Feedback
Table 8. EVM Supplies
Manufacturer
CUI Inc
Volgen America/Kaga
Electronics USA
CUI Inc
CUI Inc
CUI Inc
Figure 6. The power-on reset timing is controlled primarily from the system
Figure 6. Reset Structure
Copyright © 2016, Texas Instruments Incorporated
Output Connector Notes
Barrel Plug, 2.1-mm I.D. × Required adapter,
5.5-mm O.D. × 9.5 mm provided in EVM kit
Barrel Plug, 2.1-mm I.D. × Required adapter,
5.5-mm O.D. × 9.5 mm provided in EVM kit
Barrel Plug, 2.1-mm I.D. × Required adapter,
5.5-mm O.D. × 9.5 mm provided in EVM kit
Barrel Plug, 2.1-mm I.D. ×
5.5-mm O.D. × 9.5 mm
Barrel Plug, 2.1-mm I.D. ×
5.5-mm O.D. × 9.5 mm
DRA72x EVM CPU Board User's Guide
Hardware
11