Table of Contents
Advertisement
Operating Instructions
1
3
Fig. 19 – Choke Lever
1. Choke Lever
2. Choke OPEN
3. Choke CLOSED
2. Move the throttle lever away from the MIN.
position, about 1/3 of the way toward the MAX
position.
1
Fig. 20 – Engine Throttle
1. Throttle Lever
3. Turn the engine ignition switch ON.
Fig. 21 – Ignition Switch
4. Pull the starter grip out lightly until resistance is
felt, then pull briskly in the direction of the arrow as
shown below. Return the starter grip gently.
2
00188
IMPORTANT! Do not allow the starter grip to
snap back against the engine. Return it gently to
prevent damage to the starter.
5. Leave the engine operating at low throttle for a few
IMPORTANT! Engine should be warmed up
before putting to work.
6. Once the engine is warmed, increase the throttle
00191
6.11 Stopping the Engine
1. Stop loading material onto the splitter bed.
2. Decrease engine speed to MIN.
3. Turn the ignition switch OFF.
6.12 Stopping in an Emergency
In an emergency
• Turn the ignition switch OFF.
• Correct fault situation before restarting engine and
00187
28
Fig. 22 – Recoil Starter
minutes to allow it to warm up. Gradually push the
choke control lever open (to the left) as the engine
warms.
setting to MAX before beginning.
resuming work.
WXR720/L, WXR740/L
Trailer Wood Splitter
00192
Advertisement
Table of Contents
