Polycom V2IU 5300-S User Manual page 71

Field
Automatic MGCP Audit
Audit Cycle Interval
State Time
Prevent state re-registration
Automatic Client Deletion
Deletion Time
H 323 Terminal Type
Maximum bandwidth (kbps)
Current payload bandwidth
Estimated total bandwidth
H 323 Max Aliases
Description
The Automatic MGCP Audit flag specifies
whether MGCP clients should be
automatically audited by sending a
message to each client and wait for a
response.
The Audit Cycle Interval specifies how
often these messages should be sent out
to the clients. For each cycle, all endpoints
are audited so the rate of messages being
sent is dependent on the number of clients
currently registered.
The Stale Time value is used to decide
when a client is supposed to be deemed
stale, or unavailable.
The Prevent stale re-registration flag can
be used to disable the automatic MGCP
re-registration feature for stale clients.
Automatic Client Deletion will delete
clients that have been unavailable for a
given period of time.
Deletion Time specifies the time that a
stale client will show a warning icon in the
client list.
The H.323 TerminalType is used to
specify the type of terminal that the
5300-S should use. This value should be
set to endpoint.
This value is not used and should be set
to 0.
The total bandwidth in use for H.323 video
calls as requested by the H.323 video
endpoints.
The total bandwidth in use for video calls;
generally the current payload bandwidth
plus 20% for packet overhead.
This value is not used and should be set
to 0.
Configuring VoIP
5 - 5