Advertisement
Step 8: Deck Wall Assembly
Part 2
B: On the End Wall of the Deck Assembly measure 84mm in from the (022) Upright Shorts and install 1 (082)
End Barrier per side, making sure that the notched out end is at the bottom and fits over (042) End Floor Support
and that the top of the board is behind (043) SL Barrier Top. Attach each board at the top from the inside and at
the bottom from the outside using 4 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 8.4 and fig. 8.5)
C: Maintaining the measurement of 84mm install 1 more (082) End Barrier per side. (fig. 8.6)
Note: Measurement between boards cannot exceed 84mm.
Fig. 8.4
Fig. 8.6
022
3-5/16"
3-5/16"
(84mm)
(84mm)
Wood Parts
4 x
End Barrier 1-1/4 x 3 x 27-5/8"
082
082
022
022
Hardware
16 x
#8 x 1-3/8" Wood Screw
S20
31
Fig. 8.5
043
S20
082
The notched
out end is at
the bottom
042
S20
Advertisement
